0102030405
Grid Stamped vs Expanded Grid: Ha?aka Samar da Batir-Acid-Acid don Tsari da Ayyuka | Rukunin MINHUA
2025-02-21
Module Kwatancen Fasaha (Infographic-Friendly)
1. Babban Ka'idojin Tsari
| Siga | Fadada Grid | Grid mai hatimi |
|---|---|---|
| Shirye-shiryen Kayayyaki | Narkar da gubar → Cigaban simintin gyare-gyare (0.8-2.0mm tsiri) | Narkar da gubar → Ci gaba da birgima (tsari 1.2-3.0mm) |
| Hanyar ?ir?ira | Punching + Mi?ewar Injini (18-25m/min) | Daidaitaccen hatimi (300-500 bugun jini/min) |
| Hakuri Mai Girma | ± 0.2mm | ± 0.05mm (wanda ya dogara da mold) |
| Mabu?in Kayan aiki | Injin fa?a?awa | Ci gaba mutu stamping latsa |
Ma?alli Ma?alli:
- Gilashin hatimi sun dogara da madaidaicin ?ira (± 0.05mm) don ha?a??un geometries; grid da aka fa?a?a suna ba da fifiko ga sassauci tare da ?ananan daidaici.
2. Ma'aunin Aiki
2.1 ?arfin Injini (ASTM E8 Standard)
| Gwajin Sigar | Fadada Grid | Grid mai hatimi |
|---|---|---|
| ?arfin ?arfin ?arfi | 38-42 MPa | 55-62 MPa |
| Tsawaitawa a Break | 15-18% | 8-12% |
| Rayuwar Gajiya (Cycles) | 5,000 | 8,000+ |
Bayanin ASTM E8:
- Tsawon ma'auni: 4D (E8) ko 5D (E8M) don daidaitaccen shiri na samfur.
- Matsakaicin matsi: 0.015 ± 0.006 mm / mm / min (kullun madauki).
2.2 Harkokin Tattalin Arziki (USD/10k Units)
| Nau'in farashi | Fadada Grid | Grid mai hatimi |
|---|---|---|
| Farashin kayan aiki | 0 | 700-1,200 |
| Farashin Makamashi | 120 | 180 |
| Scrap Recycling | 25 | 85 |
| Jimlar Kudin | 145 | 965+ |
Mabu?in Insight:
- Gilashin hatimi suna haifar da farashin kayan aiki na 75%, mai yiwuwa ne kawai don samar da taro; grid da aka fa?a?a suna rage ?imbin ?angarorin da kashi 70%, manufa don ayyuka masu ?ima.
Jagorar Aikace-aikacen Masana'antu
3. Abubuwan da aka Shawarar
| Fasaha | Aikace-aikace |
|---|---|
| Fadada Grid | ? Batir SLI Automotive (> 100k raka'a / wata) |
| ? Ayyukan ESS masu tsada (?ananan CAPEX 40%) | |
| ? Daidaitaccen ?irar grid (tsararrun lu'u-lu'u/ rectangular) | |
| Grid mai hatimi | ? Fara-tsayawa / zurfin sake zagayowar baturi (> 1,200 hawan keke, da IEC 61427) |
| ? Geometries na al'ada (kun zuma / grids radial) | |
| ? Ha?uri mai girma (bambancin kauri |
Binciken Halittu:
- Tsarin Tsayawa-Fara: ?arfin grid da aka buga (55-62 MPa) da rayuwar gajiya (kewayoyin 8,000+) suna biyan bu?atun caji akai-akai.
- Ayyukan ESS: Jimlar farashin grid ?in da aka fa?a?a (145 USD/10k raka'a) ya dace da ?addamar da ayyukan CAPEX, tare da daidaitattun ?ira wa?anda ke ba da damar ha?akawa.
Sabuntawar Sabuntawa & Nassoshi
- Babban Geometries Gridgrid masu hatimi suna ba da damar 18% mafi girman lodin kayan aiki ta hanyar tsarin sa?ar zuma, ingantacce a cikin ayyukan ESS masu ?ira (misali, Xinjiang Bazhou Shared ESS).
- Fasahar Mold: GREE's ± 0.001mm daidaitattun kyallen takarda da 380-bugun jini/min saurin stamping suna ha?aka kar?uwa a cikin batura EV masu ?ima.
Sama da 95% Happy Abokan ciniki!
Barka da warhaka duk sababbi da tsoffin abokan ciniki don ziyartar kamfaninmu. ?wararrun tallace-tallacen tallace-tallace don ba da amsa mai sauri da kyakkyawan sabis. Mu koyaushe muna hidimar ku idan kuna da bu?atu. Muna sa ran samun kyakkyawar ha?in kai da samun nasarar juna a nan gaba!
KARA KOYI